⭐ BEST-SELLER | Plus de 1 126 AVIS 5 ÉTOILES
✨ Qualité Supérieure - Fabriqué avec une attention particulière aux détails
🛡️ Satisfaction Garantie - Garantie de remboursement de 30 jours
🚚 Livraison Gratuite - Pour les commandes de plus de 50 $
Impossible de charger la disponibilité du service de retrait
✓ Livraison rapide et fiable - Recevez-la entre le - et le -. Livraison gratuite pour les commandes de plus de 50 $ !
The difference between UV tube and LED tube: UV tube is made of glass, which has better mosquito trapping effect. The LED tube is made of plastic, the mosquito trapping effect is slightly weaker than that of the UV tube, and the life is longer
1. This product can be used in bedrooms, living rooms, restaurants, hotels, offices, chicken farms, animal husbandry and all other places that need to kill mosquitoes.
2. In an environment where the mosquito-killing light source is not blocked, it can be used as a stand-alone device, and the killing power range is less than 16 square meters.
3. This mosquito killer is designed with energy-saving, decorative and hypnotic static palladium low light. Therefore, the effect of lighting glare must be avoided. Whether the method of use is correct directly affects the mosquito killing effect. For example: Before going to bed, use the mosquito killer without turning on the light in the bedroom, and turn off all the lighting for 10-20 minutes, or put the mosquito killer in a dark place under the desk when working or studying.
4. Suggested height: Hang (or put) the mosquito killer lamp at a height of 0.8-1.2 meters, 0.3 meters above the wall. Keep the doors and windows tightly closed where there are mosquitoes.
5. It is recommended to use it continuously for 24 hours to minimize the number of times the lamp is switched on and off. Extend the service life of the lamp.
6. In the daytime, adding a small amount of suitable bait to the chassis of this product can also be used to kill flies.
7. Frequently clean mosquitoes stuck to metal. When cleaning, first cut off the power supply, then use an insulated metal rod to gently touch the power grid to place it, and then open the chassis to clean.
